During TD sensor initialization with SP3801, the output value of the black, magenta,
cyan, or yellow TD sensor is not within the range of 2.5
±
0.2V
TD harness sensor disconnected, loose or defective
Harness between TD sensor and drawer disconnected, defective
• TD sensor defective, replace the PCU
Note: The TD sensor cannot be replaced independently. The PCU must be replaced
if the TD sensor is defective.
SC396
D
Drum motor error: K
SC397
D
Drum motor error: M
SC398
D
Drum motor error: C
SC399
D
Drum motor error: Y
The motor is trying to rotate at power on or during normal operation but there is an
excessive load on the drum shaft. The motor has no traction (due to a bent cleaning
blade, for example).
• Drum motor harness loose, broken, defective
• Drum motor defective
• DTMB defective
SC Codes Group 4: Image Development - 2
SC400
D
ID sensor error: Calibration
Before adjustment Vsg_reg<0.5 but Vsg_reg could not be adjusted to the target
Vsg_reg = 4.0
±
0.2V during process control.
• ID sensor harness disconnected, loose, defective
• ID sensor dirty
• ID sensor defective
• ITB unit drawer connector dirty
Note: Vsg_reg is the voltage reading of the light reflected directly from the bare surface
of the ITB. The additional receptor on the color sensor is not used to read the bare
surface of the belt. For more, see Section "6. Details".
3. Appendix: Service Call Conditions
90
3
Summary of Contents for V-C3 D081
