Ricoh V-C3 D081, Field Service Manual

Page: 928 / 1092

6
DHCP (Ethernet/IEEE 802.11)
This SP code allows you confirm and change the setting that determines whether the IP
address is used with DHCP on an Ethernet or wireless (802.11) LAN network.
[0 to 1 / 1 / 1]
0: Not used (manual setting)
1: Used
21
Active IPv4 Address
This SP allows you to confirm the IPv4 address that was used when the machine started
up with DHCP.
22
Active IPv4 Subnet Mask
This SP allows you to confirm the IPv4 subnet mask setting that was used when the machine
started up with DHCP.
23
Active IPv4 Gateway Address
This SP allows you to confirm the IPv4 default gateway setting that was used when the
machine started up with DHCP.
50 1284 Compatibility (Centro)
Enables and disables bi-directional communication on
the parallel connection between the machine and a
computer.
[0 to 1 / 1 / 1 ]
0:Off, 1: On
52 ECP (Centro)
Disables and enables the ECP feature (1284 Mode) for
data transfer.
[0 to 1 / 1 / 1]
0: Disabled, 1: Enabled
65 Job Spooling
Switches the job spooling on and off.
[0 to 1 / 0 / 1]
0: No spooling, 1: Spooling enabled
4. Appendix: Service Program Mode Tables
350
4