Ricoh V-C3 D081, Field Service Manual

Page: 815 / 1092

1 Abs Humid: 1
[0 to 100/0.01 g/m
3
]
2 Abs Humid: 2
3 Abs Humid: 3
4 Abs Humid: 4
5 Abs Humid: 5
290
4
Prevent Blade Bending
A blade-bend prevention pattern is created with K toner on the ITB between every copy image
to lubricate the ITB cleaning blade so it will not bend or scour the surface of the ITB. These SPs
set 1) pattern creation interval, 2) density of the pattern, 3) whether the pattern is displayed, 4)
the temperature at which the operation is done.
Note: This function is OFF. Changing this setting is normally not required for this machine.
1 Pattern Create Interval
Sets the number of pages between patterns.
[0 to 200/1 pg.]
2 Pattern Light Intensity
Sets the density of the pattern.
[0 to 63/1]
3 Op Pg Count Display
Displays the count for the number of blade prevention patterns.
[0 to 200/1 pg.]
4 Set Operation Temp
Sets the threshold temperature for this SP code to start operating.
[0 to 50/ 1 deg]
2905 Used Toner Mtr 2 Used Toner Motor 2 Control
The used toner bottle is provided with a near-full sensor and an auger that evenly distributes
the used toner inside the bottle. To extend the life of the used toner bottle near-full motor that
rotates this auger, the motor and auger do not operate continuously. The motor is turned on
only after a prescribed amount of toner has been consumed.
1 Tnr Consumed
Sets the amount of toner to be consumed before the used toner bottle
is switched on.
[1 to 10/1 g]
Group 2000
237
4