Ricoh V-C3 D081, Field Service Manual, Page: 440 / 1092

1. Remove:
[A] Inner cover ( x2)
[B] Two side fences ( x1 each)
[C] Sensor bracket ( x1)
[D] Two sensors (
x1 each, Pawls x4 each)
Tandem Tray Paper Size Change
At the factory, this tray is set for A4 or LT LEF so only A4 or LT LEF paper can be used for tandem feed at
this setting.
1. Open the front cover.
2. Pull out the tandem feed tray [A] out completely to separate the right tandem tray [B] from the left
tandem tray.
Right Tray
1. Remove the right tandem inner cover [C] ( x 2).
2. Re-position the side fences [D] ( x 1 each).
• A4: Outer slot position
• LT: Inner slot position
3. Re-install the right tandem inner cover.
4. Replacement and Adjustments
438
4