Ricoh V-C3 D081, Field Service Manual

Page: 611 / 1092

No. Component Function
M5 Paper Feed Motor: Tray 2
Drives the paper feed roller and grip roller of tray 2
(middle tray).
M6 Waste Toner Distribution Motor
Drives the coil that spans the top of the waste toner
bottle.
M7 Lift Motor - Tray 2
Switches on and drives a shaft and coupling that raises
a lift arm against the bottom plate under the paper stack
in tray 2
M8 Lift Motor: Tray 3
Drives a shaft and coupling that raises a lift arm against
the bottom plate under the paper stack in tray 3.
M9 Lift Motor: Tray 1
Drives pulleys and cables that lift the bottom plate of
tray 1 (tandem tray) until the top of the paper stack
reaches the correct height for feeding.
M10 Rear Fence Motor - Tray 1
Switches on when the right paper tray sensor of the
tandem paper tray unit detects paper out and the left
paper tray sensor detects paper present.
M11 ITB Lift Motor Rotates the cam that raises and lowers the ITB belt.
M12 Ozone Fan Motor
Draws air from around the drums and through the
ozone filter.
M13 Fusing Fan Motor Cools the fusing unit.
M14 Fusing Cooling Fan Motor: Lower Cools the fusing unit.
M15 Fusing Exhaust Fan Motor
Draws the hot air away from the heat sink mounted
above the fusing unit and expels the hot air through a
vent
M16 Fusing/Exit Motor Drives the fusing unit and paper exit.
M17 PTR Motor Drives the paper transfer roller (PTR).
M18 Bypass Feed Motor
Drives the upper relay roller that feeds each sheet to the
registration roller.
M19 Duplex Jogger Motor Moves the jogger fences in the duplex unit.
M20 Duplex Unit Fan Motor Cools the duplex unit.
M21 Duplex Transport Motor Drives transport rollers 3, 4 in the duplex unit.
Specifications
33
1