Ricoh V-C3 D081, Field Service Manual

Page: 1086 / 1092

bit 3
[PCL,PS]: Allow BW jobs to print without requiring
User Code
0: Disable
1: Enable (allow
BW jobs to print
without a user
code)
BW jobs submitted without a user code will be printed even if user code authentication
is enabled.
Note: Color jobs will not be printed without a valid user code.
bit 4
to 7
DFU - -
1001 Bit Switch
009 Bit Switch 9 0 1
bit 0
PDL Auto Detection timeout of jobs submitted via
USB or Parallel Port (IEEE 1284).
0: Disable
(Immediatel
y)
1: Enable
(10 seconds)
To be used if PDL auto-detection fails. A failure of PDL auto-detection does not
necessarily mean that the job cannot be printed. This bit switch tells the device whether
to time-out immediately (default) upon failure or to wait 10 seconds.
bit 1 DFU - -
bit 2
Job Cancel
Disable
(Not
cancelled)
Enable
(Cancelled)
If this bit switch, all jobs will be cancelled after a jam occurs.
Note: If this bitsw is enabled, printing under the following conditions might result in
problems:
- Job submission via USB or Parallel Port
- Spool printing (WIM >Configuration > Device Settings > System)
bit 3
to 7
DFU - -
1003 Clear Setting
4. Appendix: Service Program Mode Tables
508
4