Ricoh V-C3 D081, Field Service Manual

Page: 798 / 1092

242
1
LEdge Cor:Norm K
Leading Edge Correction for Plain Paper: K. This SP sets the coefficient used to 1) correct bias at
the leading edge for black image transfer (ITB) 2) bias at image to paper transfer, and 3) correct
the dc and ac voltages applied at paper separation.
Notes: These settings apply:
• To the distance from the leading edge set with SP2422
• Only to black printing on plain paper at full speed (even when full-color is selected).
7 Side1:PTR
[0 to 250/ 1%]
8 Side1:SepDC
9 Side1:SepAC
12 Side2:PTR
13 Side2:SepDC
14 Side2:SepAC
2422 LEdge SWT:Norm K
Leading Edge Switch Timing for Plain Paper: K. Sets the switch off timing SP2421. The value
selected is the number of mm from the leading edge of the paper. These settings 1) apply only
to black printing on plain paper at full speed (even when full-color is selected), and 2) apply
to both sides of a duplex page.
2 PTR
[0 to 30/1 mm] 3 SepDC
4 SepAC
2423 TEdgeCor:Norm K
Trailing Edge Correction for Plain Paper: K. This SP sets the coefficient used to correct bias
at image to paper transfer for each side of the paper. These settings are applied to the trailing
edge for black printing on plain paper at full speed and apply to black, even when printing
in full color mode.
4. Appendix: Service Program Mode Tables
220
4