Ricoh V-C3 D081, Field Service Manual

Page: 316 / 1092

Scanner Wire Reinstallation and Scanner Position Adjustment
1. Place the beads [A] on the middle of the wire on the pulley openings.
2. Wind the ball end of the wire [B] 4 times.
3. Wind the other end of the wire [C] 5 times.
4. Attach tape [D] across the pulley to temporarily hold the wires in place.
5. Position the 1st scanner [A] so the holes are aligned and insert the positioning pins [B] (x4).
6. Position the 2nd scanner [C] so its holes are aligned and insert the positioning pins [D].
7. Attach the lock bracket [E] to fasten the wire to the 1st scanner.
8. Tighten the screw of tension bracket (
(4) p.313 "Scanner Wire").
9. Attach the pulley and tighten it lock screw ( (7) p.313 "Scanner Wire").
4. Replacement and Adjustments
314
4