Ricoh V-C3 D081, Field Service Manual, Page: 308 / 1092

If an administrator setting is registered for the machine, Step 2 and 3 are required. Otherwise, skip
to Step 4.
2. Push [Login/Logout] on the operation panel.
3. Login with the administrator user name and password.
4. Touch "Extended Feature Settings" twice on the LCD.
5. Touch the icon for each application until the status changes to "Stop".
• All applications must be stopped before the machine is switched off.
6. Turn the machine off, and then remove the VM Card from Slot 1 (lower slot).
7. Do the procedure:
• Updating the App 2 Me application firmware.
• Updating the main machine firmware
• Backing up the NVRAM
• Executing application move or undo with SP5873.
Starting Up After the VM Card Has Been Removed
1. Insert the VM card in Slot 1 (lower slot).
If an administrator setting is registered for the machine, Step 2 and 3 are required. Otherwise, skip
to Step 4.
2. Push [Login/Logout] on the operation panel.
3. Login with the administrator user name and password.
4. Touch "Extended Feature Settings" twice on the LCD.
5. Touch the icon for each application that you want to start. You will see the "Starting up" status message
for each application that you start.
6. Touch "Exit" on the screen.
7. Exit the "User Tools/Counter" settings.
4. Replacement and Adjustments
306
4