Ricoh V-C3 D081, Field Service Manual

Page: 1084 / 1092

1001 Bit Switch
005 Bit Switch 5 0 1
bit 0
Show "Collate Type", "Staple Type" and "Punch
Type" buttons on the operation panel.
0: Disable 1: Enable
If enabled, users will be able to configure a Collate Type, Staple Type, and Punch Type
from the operation panel. The available Types will depend on the device and
configured options.
After enabling this BitSw, the settings will appear under:
"User Tools > Printer Features > System"
bit 1 Multiple copies if a paper size or type mismatch
occurs 0: Disable
(Single
copy)
1: Enable
(Multiple copy)
If a paper size or type mismatch occurs during the printing of multiple copies, only a
single copy is output by default. Using this BitSw, the device can be configured to print
all copies even if a paper mismatch occurs.
bit 2 Prevent SDK applications from altering the contents
of a job.
0: Disable 1: Enable
If this BitSw is enabled, SDK applications will not be able to alter print data. This is
achieved by preventing SDK applications from accessing a module called the "GPS
Filter".
Note: The main purpose of this BitSw is for troubleshooting the effects of SDK
applications on data.
bit 3 [PS] PS Criteria 0: Pattern3 1: Pattern1
Change the number of PS criterion used by the PS interpreter to determine whether a
job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs to 1000
jobs. 0: Disable
(100)
1: Enable
(1000)
Enable: Changes the maximum number of jobs that can be stored on the HDD via Job
Type settings to 1000. The default is 100.
4. Appendix: Service Program Mode Tables
506
4