Ricoh V-C3 D081, Field Service Manual, Page: 429 / 1092

2. Remove:
[A] Jogger fences ( x 1 ea.)
[B] Left transport cover ( x 2)
• The front screw is a shoulder screw. Insert the screws in the correct holes when re-attaching.
• To avoid breaking the tabs under the left edge of the table, pull the table to the right to disengage
the tabs and then remove.
3. Remove:
[C] Transport sensor 1 ( x 1, x 1)
[D] Transport sensor 2 ( x 1, x 1)
[E] Inverter exit sensor ( x 1, x 1, x 1)
Reinstallation
• Make sure the end tabs [F] of the left transport cover are engaged correctly.
Duplex Unit
427
4