ResMed S8 ESCAPE S8, User Manual

Page: 27 / 269

22
R
EPLACING THE
A
IR
F
ILTER
To replace the air filter:
1. Remove the air filter cover at the back of the S8 E
SCAPE
.
2. Remove and discard the old air filter.
3. Insert a new filter with the blue tinted side facing out from the device.
4. Replace the air filter cover.
Inspect the air filter every month to check if it is blocked by dirt or contains holes. With
normal use of an
S8 E
SCAPE
, the air filter needs to be replaced every six months (or
more often if your device is in a dusty environment).
!
WARNING
•
Do not wash the air filter. The air filter is not washable or reusable.
•
The air filter cover protects the device in the event of accidental liquid spillage
onto the device. Ensure the air filter and air filter cover are fitted at all times.
S
ERVICING
!
CAUTION
•
Do not attempt to open the S8 Escape case. There are no user serviceable
parts inside.
•
Inspection and repair should only be performed by an authorised agent. Under
no circumstances should you attempt to service or repair the flow generator
yourself.
This product ( S8 E
SCAPE
) should be inspected by an authorised ResMed Service
Centre five years from the date of manufacture. Prior to this, the device is intended to
provide safe and reliable operation provided that it is operated and maintained in
accordance with the instructions provided by ResMed. Applicable ResMed warranty
details are provided with the device at the time of original supply. Of course, as with
all electrical devices, if any irregularity becomes apparent, you should exercise caution
and have the device inspected by an Authorised ResMed Service Centre.
If you feel that your flow generator is not performing properly, see “Troubleshooting”
on page 25.
Air filter cover
338223r1.book Page 22 Friday, June 3, 2005 4:16 PM