ResMed S8 ESCAPE S8, User Manual

Page: 21 / 269

16
H
OW TO EXIT OUT OF A MENU
Press the Right key (Exit). This will take you back to the Patient Menu screen.
H
OW TO EXIT OUT OF AN ITEM WITHIN THE MENU
Press the Right key (Exit).
H
OW TO
C
HANGE THE
R
AMP
T
IME
During ramp time, the pressure increases from a low pressure to the prescribed
treatment pressure. You can set the ramp time in 5-minute intervals, from 0 minutes
(OFF) up to a maximum ramp time set by your clinician.
The standby screen displays the current ramp time in the right-hand corner. To change
the ramp time, press the
Up
or
Down
key until the desired ramp time appears.
Once a ramp time is selected, begin therapy by pressing the
Start/Stop
key.
When ramping begins the LCD will display the word "RAMPING", with the current
pressure indicated as dashes. Each dash is approximately equivalent to 2 cm H
2
O. For
example, six dashes represents approximately 12 cm H
2
O pressure.
H
OW TO CHANGE THE
A
LTITUDE SETTING
If you move or travel with your S8 E
SCAPE
to areas of different altitude, you will need
to adjust the altitude compensation setting. Changes in altitude will affect the pressure
delivered by the
S8 E
SCAPE
.
You can use the Altitude setting (ALT) to specify the altitude range at which you are
using your
S8 E
SCAPE
. Select the S8 E
SCAPE
menu by pressing the Left key in the
standby (RAMP) screen. Scroll to ALT and select Change ( Left key). Press the Up or
Down keys until you see the setting option that you require.
There are four altitude settings to choose from:
•
0–609 m
•
610–1219 m
•
1220–1828 m
•
1829–2591 m.
For example, if you are at an altitude of 947 m, your altitude compensation setting
would be 610–1219 m, as 947 m falls within that range.
Press the Left key (Apply) to select the correct setting.
H
OW TO CHANGE THE LANGUAGE SETTING
To display menus and messages in a different language, select the S8 E
SCAPE
menu by
pressing the Left key in the standby (Ramp) screen. Scroll to LANG and select Change
( Left key). Press the Up or Down keys until you see the language that you require.
O
THER VIEWABLE INFORMATION
You can also view the total number of hours of treatment (USED HRS); the number
of sessions that the
S8 E
SCAPE
was used in a usage period (USAGE); and the current
software version installed on your unit (SW). Access to all of these screens is provided
via the menu. See “How to enter the menu screens” on page 15.
338223r1.book Page 16 Friday, June 3, 2005 4:16 PM