ResMed S8 ESCAPE S8, User Manual

Page: 18 / 269

13
E
NG
LISH
H
OW TO
A
TTACH A
H
UMIDIFIER
H
OW TO
A
TTACH A
H
UMIDIFIER
A
TTACH A
H
UMID
A
IRE
3
i
H
UMIDIFIER
Please refer to the illustration in section
E
of the illustration sheet, and your HumidAire 3i
manual.
The H
UMID
A
IRE
3i attaches to the front of the S8 E
SCAPE
to provide heated
humidification. No other accessories are required for its use .
Notes:
a. Make sure the water chamber of the HumidAire 3i is empty before you attach or
detach the humidifier.
b. Remove the connector plug on the S8 Escape (see section A of the illustrations
sheet) before you attach the HumidAire 3i. Reattach the connector plug firmly
after you detach the HumidAire 3i.
S
TORING THE
H
UMID
A
IRE
3
i
Store the H
UMID
A
IRE
3i in the larger mesh-top pouch of the S8 E
SCAPE
carry bag when
not in use.
A
TTACH A
H
UMID
A
IRE
H
UMIDIFIER
Please refer to the illustrations in section I of the illustration sheet.
To connect your S8 E
SCAPE
to a H
UMID
A
IRE
humidifier you need medium sized
(52 cm) air tubing.
1
Fill the
H
UMID
A
IRE
water chamber and place inside the
H
UMID
A
IRE
. Connect the
medium (52 cm) and long (2 m) air tubing (
I-1
), and close the humidifier lid.
2
Place the S8 E
SCAPE
on top of the H
UMID
A
IRE
( I-2 ) and connect the free end of the
medium air tubing to the air outlet (
I-3
).
Note:
To avoid water spilling into the S8 Escape, do not put it underneath the humidifier.
3
Assemble your mask system and connect it to the free end of the long air tubing ( I-4 ).
4
Plug the H
UMID
A
IRE
power cord into a power outlet. Connect the S8 E
SCAPE
power
cord to the socket at the rear of the S8 E
SCAPE
and plug the other end into a power
outlet.
Please refer to the
HumidAire User’s Manual for further details.
!
WARNING
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
The S8 E
SCAPE
is now ready for use with the H
UMID
A
IRE
.
338223r1.book Page 13 Friday, June 3, 2005 4:16 PM