R&S SGT100A, User Manual

Page: 139 / 593

Signal Generator Settings
R&S
®
SGT100A
108 User Manual 1176.8674.02 ─ 07
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:SAMPles
on page 367
Amplitude
Enters the digital amplitude of the rectangular wave. The abbreviation FS stands for full
scale.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:AMPLitude
on page 366
Offset DC
Enters a DC component.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:OFFSet
on page 367
Generate Signal File
Generates a signal and saves it to a file.
The "File Select" window opens automatically and the signal can be stored as a wave-
form file.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:CREate:NAMed
on page 366
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:CREate:NAMed
on page 366
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate:NAMed
on page 366
Generate Signal RAM
Generates a signal and uses it as output straight away.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:CREate
on page 366
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:CREate
on page 366
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate
on page 366
7.1.2.7 Const I/Q Test Signal
This dialog provides settings for configuration of a continuous test signal with constant
IQ. The I and Q values for each path are adjustable but constant.
Converted to analog, the signal is output directly at the I and Q connectors of the
instrument.
Baseband