Remote Control Commands
R&S
®
SGT100A
479
User Manual 1176.8674.02 ─ 07
Example:
Response: -221, 'Settings conflict', 153,
'Input voltage out of range'
The two returned errors have occurred since the error queue
was last queried.
Usage:
Query only
:SYSTem:VERSion?
Queries the SCPI version the instrument's command set complies with.
Return values:
<Version>
string
Example:
SYST:VERS
queries the SCPI version.
Response:
"1996"
The instrument complies with the SCPI version from 1996.
Usage:
Query only
:SYSTem:COMMunicate:GPIB:LTERminator
<LTerminator>
Sets the terminator recognition for remote control via GPIB bus.
Parameters:
<LTerminator>
STANdard | EOI
EOI
The terminator must be sent together with the line message EOI
(End of Line). This setting is recommended for binary block
transmissions where a character could coincidentally have the
value LF (Line Feed) but is not intended as the terminator. This
setting must be selected for block data with undefined length.
STANdard
An LF (Line Feed) is recognized as the terminator regardless of
whether it is sent with or without EOI.
*RST:
STANdard
Example:
SYSTem:COMMunicate:GPIB:LTERminator EOI
only a character which is sent simultaneously with the line mes-
sage EOI is accepted as the terminator.
:SYSTem:COMMunicate:GPIB:RESource?
Queries the visa resource string for remote control via the GPIB interface.
To change the GPIB address, use the command
.
Return values:
<Resource>
string
SYSTem Subsystem
