Remote Control Commands
R&S
®
SGT100A
352
User Manual 1176.8674.02 ─ 07
11.14.4.1
Common Settings
[:SOURce<hw>]:BB:ARBitrary:PRESet
............................................................................ 352
[:SOURce<hw>]:BB:ARBitrary:STATe
..............................................................................352
[:SOURce<hw>]:BB:ARBitrary:PRESet
Sets all ARB generator parameters to their default values.
Example:
SOURce1:BB:ARB:PRESet
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:STATe
<State>
Activates the standard and deactivates all the other digital standards and digital modu-
lation modes in the same path.
You have to selecta an waveform first.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Example:
SOURce1:BB:ARBitrary:WAV:SELect 'wave1'
loads waveform file from the default directory.
SOURce1:BB:ARBitrary:TRIGger:SEQ RETR
sets trigger mode Retrigger.
SOURce1:BB:ARBitrary:STATe ON
switches on the ARB generator. The selected waveform is out-
put straight away. A trigger event causes restart.
Manual operation:
See
11.14.4.2
Clock Settings
The
CLOCk
subsystem contains the commands for setting the clock.
For option R&S
SGT-K540, the ARB waveform for the envelope tracking (
SOURce2
)
uses the same clock settings as the first ARB waveform (
SOURce1
). Therefore these
commands are not defined for
SOURce2
.
[:SOURce<hw>]:BB:ARBitrary:CLOCk
............................................................................. 353
[:SOURce<hw>]:BB:ARBitrary:CLOCk:MODE
...................................................................353
[:SOURce<hw>]:BB:ARBitrary:CLOCk:MULTiplier
.............................................................353
[:SOURce<hw>]:BB:ARBitrary:CLOCk:SOURce
................................................................354
[:SOURce<hw>]:BB:ARBitrary:CLOCk:SYNChronization:MODE
......................................... 354
[:SOURce<hw>]:BB:ARBitrary:CLOCk:SYNChronization:EXECute
..................................... 355
SOURce Subsystem
