R&S SGT100A, User Manual

Page: 473 / 593

Remote Control Commands
R&S
®
SGT100A
442 User Manual 1176.8674.02 ─ 07
Manual operation: See "PEP
in
Min/Max" on page 165
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:POWer:OFFSet?
Queries the current power offset, that is the sum of enabled "RF Level > Offset" and
"User Correction".
Return values:
<PowerOffset> float
Range:
-200 to 200
Increment: 0.01
*RST:
0
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Usage: Query only
Manual operation: See "Power Offset" on page 165
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:MODE
<ShapingMode>
Enables envelope shaping and selects the method to define the shaping function.
Parameters:
<ShapingMode> OFF | LINear | TABLe | POLYnomial | DETRoughing | POWer
LINear
= Linear (Voltage)
POWer
= Linear (Power)
*RST: OFF
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "Shaping" on page 169
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:SCALe <Scale>
Determines the units used on the x and y axis.
Parameters:
<Scale> POWer | VOLTage
*RST:
VOLTage
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "Scale" on page 175
SOURce Subsystem