R&S SGT100A, User Manual

Page: 459 / 593

Remote Control Commands
R&S
®
SGT100A
428 User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:I <I>
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:Q <Q>
Specifies the amplifier bias of the respective I- or Q- component.
The maximum overall voltage depends on the I/Q output type.
See Table 7-4 .
Parameters:
<Q> float
Range:
-3.6 to 3.6
Increment: 0.002
*RST:
0
Example: IQ:OUTP:BIAS:Q 0.1 V
Manual operation: See "Bias (EMF)" on page 144
[:SOURce<hw>]:IQ:OUTPut:LEVel <Level>
Sets the off-load voltage of the analog I/Q signal output.
The value range and maximum overall voltage vary, depending on the I/Q output type.
See Table 7-4 .
Parameters:
<Level> float
Range:
0.02 to 4
Increment: 0.001
*RST:
1
Example:
:IQ:OUTP:TYPE DIFF
:IQ:OUTP:LEV 1.5 V
outputs the differential I/Q signal with 1.5 V power.
Manual operation: See "I/Q Level Vp EMF" on page 144
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:MODE <Mode>
Determines the mode for setting the output parameters.
Parameters:
<Mode> FIXed | VARiable
FIXed
locks the I/Q output settings
VARiable
unlocks the settings
*RST:
FIXed
Example: SOUR:IQ:OUTP:MODE VAR
SOUR:IQ:OUTP:ANAL:POW:LEV 2V
SOURce Subsystem