Remote Control Commands
R&S
®
SGT100A
373
User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:POWer
<Power>
The command sets the gain of the selected carrier.
Parameters:
<Power>
float
Range:
-80 to 0
Increment: 0.01
*RST:
0
Default unit: dB
Example:
BB:ARB:MCAR:CARR15:POW -50 dB
sets the power of carrier 15 to -50 dB.
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:MCARrier:POWer:REFerence
<Reference>
Defines the way the individual carriers in a composed multi carrier signal are leveled.
Parameters:
<Reference>
RMS | PEAK
*RST:
RMS
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:STATe
<State>
Enables/disables the selected carrier.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Example:
SOURce1:BB:ARBitrary:MCARrier:CARRier15:STATe
ON
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CFACtor:MODE
<Mode>
The command sets the mode for optimizing the crest factor by calculating the carrier
phases.
SOURce Subsystem
