Remote Control Commands
R&S
®
SGT100A
363
User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:MODE
<Mode>
The command defines the signal for the selected marker output.
Parameters:
<Mode>
UNCHanged | RESTart | PULSe | PATTern | RATio
UNCHanged
A marker signal as defined in the waveform file (tag 'marker
mode x') is generated.
RESTart
A marker signal is generated at every waveform start.
PULSe
A pulsed marker signal is generated. The pulse frequency (=
sample rate/divider) is defined with the
SOUR:BB:ARB:TRIG:OUTP:PULS:DIV
command and can be
queried with the
SOUR:BB:ARB:TRIG:OUTP:PULS:FREQ?
command.
PATTern
A marker signal is generated with the aid of a user-definable bit
pattern. The bit pattern is entered with the aid of com-
mand
:BB:ARB:TRIGger:OUTPut:PATTern
. The bit pattern
is a maximum of 32 bits long.
RATio
A regular marker signal corresponding to the Time Off / Time On
specifications in the commands
:ARB:TRIGger:OUTPut:
OFFTime
and
:ARB:TRIGger:OUTPut:ONTime
is generated.
*RST:
UNCHanged
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:OFFTime
<OffTime>
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:ONTime
<OnTime>
The command sets the number of samples in a period (ON time + OFF time) during
which the marker signal in setting
:ARB:TRIGger:OUTPut:MODE RATio
on the
marker outputs is ON.
Parameters:
<OnTime>
integer
Range:
1 to 14913079
*RST:
1
Example:
BB:ARB:TRIG:OUTP2:ONT 20
sets an ON time of 20 samples for marker 2
Manual operation:
See
SOURce Subsystem
