R&S SGT100A, User Manual

Page: 432 / 593

Remote Control Commands
R&S
®
SGT100A
401 User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:BBIN:ALEVel:EXECute
This command starts measuring the input signal. The measurement estimates the
crest factor and the peak power.
Example: BBIN:ALEV:EXEC
starts measuring the input signal.
Usage: Event
Manual operation: See "Auto Level Set" on page 240
[:SOURce<hw>]:BBIN:CDEVice?
Digital Input only.
Indicates the ID of an externally connected R&S Instrument or R&S Device.
Return values:
<CDevice> string
Example: BBIN:CDEV
queries the connected device ID.
Usage: Query only
Manual operation: See "Connected Device" on page 238
[:SOURce<hw>]:BBIN:CFACtor <CFactor>
This command enters the crest factor of the external baseband signal.
Parameters:
<CFactor> float
Range:
0 to 30
Increment: 0.01
*RST:
0
Default unit: dB
Example: BBIN:CFAC 10
enters a crest factor of 10 dB for the external baseband signal.
Manual operation: See "Crest Factor" on page 241
[:SOURce<hw>]:BBIN:DIGital:ASETting:STATe <State>
Activates automatic adjustment of the baseband input signal.
The R&S SGT receives peak level, level and crest factor values directly from the con-
nected transmitter and recognizes changes automatically.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
SOURce Subsystem