First Steps with the Instrument
R&S
®
SGT100A
40
User Manual 1176.8674.02 ─ 07
The "Configure Instruments" dialog opens. The list of configured instruments is
empty.
3. Select "Configure Instruments > Scan".
The software scans the network for connected and active instruments.
Alternatively, use the "New" function to add the R&S
SGT manually to the list of
instruments.
4. Close the dialog.
5. In the block diagram, select "Vector Sig Gen" block and select the R&S
SGT form
the list.
6. In the block diagram, select "Arb Sig Gen" block and select the R&S
SGT form the
list.
How to Create a Waveform File with R&S WinIQSIM2 and Load it in the ARB