Signal Generator Settings
R&S
®
SGT100A
128
User Manual 1176.8674.02 ─ 07
Noise Bandwidth
Available only for "Mode > Additive Noise" and "Mode >Noise Only" and when the
AWGN generator is activated.
Indicates the real noise bandwidth.
Remote command:
[:SOURce<hw>]:AWGN:BWIDth:NOISe?
Display Mode
Sets the output to which the displayed settings are related to.
This setting also influences:
●
The way the interfering parameters are displayed, e.g. if the SNR value is defined
as C/N or as S/N.
●
The value units:
–
The values related to the RF outputs are displayed in
dBm
–
The values related to the baseband outputs - in
dB
Remote command:
Set Noise Power Via
Available only for "Mode > Additive Noise".
Selects the way the noise power is determined.
The following correlation applies:
Additive White Gaussian Noise (AWGN) - Noise Generator