R&S SGT100A User Manual Download Page 2

Page: 2 / 593

This manual describes the following R&S

SGT100A, stock no. 1419.4501.02 and its options.

●

R&S

SGT-B1, Reference Oscillator OCXO (1419.5608.02)

●

R&S

SGT-B88, Extension Unit (1419.8207.02)

●

R&S

SGT-KB106, Frequency extension to 6 GHz (1419.5708.02)

●

R&S

SGT-K16, Diff. analog I/Q outputs

●

R&S

SGT-K18, Digital baseband connectivity (1419.6240.02)

●

R&S

SGT-K22, Pulse modulation (1416.6279.02)

●

R&S

SGT-K62, Additive White Gaussian Noise (AWGN) (1419.6304.02)

●

R&S

SGT-K90, Phase Coherent Input/Output (1419.6333.02)

●

R&S

SGT-K510, ARB baseband generator (1419.7500.02)

●

R&S

SGT-K511/512, ARB memory extension (1419.6362.02/1419.6391.02)

●

R&S

SGT-K521/522, ARB bandwidth extension (1419.6247.02/1419.6456.02)

●

R&S

SGT-K523, Baseband Extension to 240 MHz (1419.7952.02)

●

R&S

SGT-K540, Envelope Tracking (1419.7800.02)

●

R&S

SGT-K541, AM/AM AM/PM Predisortion (1419.7852.02)

●

R&S

SGT-K543, Envelope ARB (1419.7900.02)

●

R&S

SGT-K200, Waveform package for signals from R&S

WinIQSIM2

(1419.5850.71/72/75)

●

R&S

SGT-K110/-K111/-K112-/K113/-K114/-K115-/K116/-K117/-K118/-K119/-K120/-K121/-K122/-

K151, Waveform Libraries for ARB Generator

This manual describes firmware version FW 3.50.124.xx and later of the R&S

SGT100A.

© 2017 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email:

[email protected]

Internet:

www.rohde-schwarz.com

Subject to change – Data without tolerance limits is not binding.
R&S

is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of their owners.

R&S

SGT100A is abbreviated as R&S

SGT, R&S

SGMA-GUI is abbreviated as R&S

SGMA-GUI, R&S

WinIQSIM2

is abbreviated

as R&S

WinIQSIM2.

Summary of Contents for SGT100A


















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SGT100A

Reviews:

Related manuals for SGT100A

Brands by name

Popular brands

R&S SGT100A, User Manual

Search results

Summary of Contents for SGT100A

Reviews:

Related manuals for SGT100A

Brands by name

Popular brands