Error Messages and Troubleshooting
R&S
®
SGT100A
523
User Manual 1176.8674.02 ─ 07
Error
Code
Error
Description
Remedy
180
Adjustment failed
Adjustment could not be executed
The adjustment data have to be
generated first by an internal or
external adjustment or to be loa-
ded into the device.
182
Adjustment data miss-
ing
Adjustment data are missing.
The adjustment data have to be
generated first by an internal or
external adjustment or to be loa-
ded into the instrument.
183
Adjustment data inva-
lid
Adjustment data are invalid and must
be restored.
The adjustment data have to be
generated again by an internal or
external adjustment or to be loa-
ded into the instrument.
200
Cannot access hard-
ware
The data transmission to a module
was unsuccessful.
The module is not installed, not
properly installed or missing.
201
Hardware revision out
of date
A later version of certain parts of the
instrument is necessary to execute
the function selected.
The driver does not support the
installed version of a module.
202
Cannot access the
EEPROM
A error occurs when writing or reading
a EEPROM.
The EEPROM might be defect
and has to be replaced.
203
Invalid EEPROM data
204
Driver initialization
failed
Initialization of a driver fails when
booting the instrument firmware.
The driver is not compatible with
the hardware or software config-
uration of the instrument.
241
No current list
There is no list selected.
To execute the required opera-
tion, a list has to be selected in
the related dialog. If no list is
available, a new list must be cre-
ated.
242
Unknown list type
specified
The list type selected is not valid for
the required operation.
For instance, the file extension for
mapping files is
*.map
. It is not possi-
ble to enter another file extension
when selecting a list.
Check the selected list type.
460
Cannot open file
The selected file can not be opened.
Check the path and file name.
461
Cannot write file
The file can not be written.
Check if the file is read-only.
462
Cannot read file
The file can not be read.
Check if the file contents are
compatible with the file type.
463
Filename missing
The required operation cannot be
executed because the file name is not
specified.
A file name has to be entered
when creating a new list.
464
Invalid filename exten-
sion
The file extension is not valid for the
required operation.
Check the file extension.
For instance, the file extension
for the mapping files is
*.map
. It
is not possible to enter another
file extension when storing a list.
Device-Specific Error Messages
