R&S SGT100A, User Manual

Page: 461 / 593

Remote Control Commands
R&S
®
SGT100A
430 User Manual 1176.8674.02 ─ 07
Parameters:
<Type> SINGle | DIFFerential
*RST:
SINGle
Example: SOURce1:IQ:OUTPup:ANALog:TYPE DIFFerential
Manual operation: See "I/Q Output Type" on page 143
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:COUPling[:STATe] <State>
Couples the bias setting of the I and Q signal components.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: IQ:OUTP:BIAS:COUP ON
Activates I/Q bias coupling.
Manual operation: See "Couple I/Q Bias" on page 144
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:I <I>
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:Q <Q>
Specifies the amplifier bias of the respective I- or Q- component.
The maximum overall voltage depends on the I/Q output type.
See Table 7-4 .
Parameters:
<Q> float
Range:
-3.6 to 3.6
Increment: 0.002
*RST:
0
Example: IQ:OUTP:BIAS:Q 0.1 V
Manual operation: See "Bias (EMF)" on page 144
[:SOURce<hw>]:IQ:OUTPut:LEVel <Level>
Sets the off-load voltage of the analog I/Q signal output.
The value range and maximum overall voltage vary, depending on the I/Q output type.
See Table 7-4 .
Parameters:
<Level> float
Range:
0.02 to 4
Increment: 0.001
*RST:
1
SOURce Subsystem