R&S SGT100A, User Manual

Page: 491 / 593

Remote Control Commands
R&S
®
SGT100A
460 User Manual 1176.8674.02 ─ 07
<DeltaPower> float
Range:
-20 to 20
Increment: 0.01
*RST:
0
Example: See Example "Defining correction coefficients and enabling digi-
tal predistortion" on page 447
Usage: Query only
11.14.15 SOURce:PHASe Subsystem
[:SOURce]:PHASe
......................................................................................................... 460
[:SOURce]:PHASe:REFerence
........................................................................................ 460
[:SOURce]:PHASe <Phase>
Specifies the phase variation relative to the current phase.
Parameters:
<Phase> float
Range:
-360 to 360
Increment: 0.1
*RST:
0
Default unit: DEG
Manual operation: See "Delta Phase" on page 200
[:SOURce]:PHASe:REFerence
Adopts the phase set with command
[:SOURce]:PHASe
as the current phase.
Usage: Event
Manual operation: See "Reset Delta Phase Display" on page 200
11.14.16 SOURce:PULM Subsystem
This subsystem contains the commands for setting the pulse modulation.
Programming Examples
Example: Performing pulse modulation
This example shows a command sequence to perform pulse modulation.
// ******************************************************************
// Reset the instrument to start from an initial state
// ******************************************************************
*RST; *CLS
SOURce Subsystem