R&S SGT100A, User Manual

Page: 228 / 593

Signal Generator Settings
R&S
®
SGT100A
197 User Manual 1176.8674.02 ─ 07
Note: Enter the correction values in the required order. The value range of the sub-
sequent correction values is automatically adjusted.
6. To store the setting in a file, select "Save/Recall Normalized Data > Save".
Enter a "File Name", e.g. My_DPD_Normalized .
Save/Recall Normalized Data ..................................................................................... 197
Pin
max
.......................................................................................................................... 197
Vin/Vmax, ΔV/V,ΔPhase (deg) ....................................................................................197
Apply, OK .................................................................................................................... 197
Save/Recall Normalized Data
Accesses the "Save/Recall" dialog, i.e. the standard instrument function for storing and
recalling the dialog-related settings in a file. The provided navigation possibilities in the
dialog are self-explanatory.
The file name and the directory it is stored in are user-definable; the file extension is
however predefined.
The normalized data files are files with extension
*.dpd_norm
, see "File format of the
normalized data" on page 183.
Remote command:
[:SOURce<hw>]:IQ:DPD:SHAPing:NORMalized:DATA:CATalog?
on page 458
[:SOURce<hw>]:IQ:DPD:SHAPing:NORMalized:DATA:LOAD
on page 458
[:SOURce<hw>]:IQ:DPD:SHAPing:NORMalized:DATA:STORe
on page 458
Pin
max
Sets the value of the maximum input power level.
Pin
max
corresponds to a normalized input power of 1, that is the max. allowed value on
the x-axis.
Select "Apply" to confirm the settings.
Remote command:
See
[:SOURce<hw>]:IQ:DPD:SHAPing:NORMalized:DATA
on page 457
Vin/Vmax, ΔV/V,ΔPhase (deg)
Sets the correction as a group of three values.
Select "Apply" to confirm the settings.
Remote command:
See
[:SOURce<hw>]:IQ:DPD:SHAPing:NORMalized:DATA
on page 457
Apply, OK
Triggers the instrument to adopt the normalized data.
Use "OK" to apply the setting and exits the dialog.
Remote command:
n.a.
Applying Digital Predistortion