Remote Control Commands
R&S
®
SGT100A
366
User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:CREate
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:CREate
Generates a signal and uses it as output straight away.
Example:
BB:ARB:TSIG:SINE:CRE
generates a test sine signal and uses it as output straight away.
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate:NAMed
<Filename>
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:CREate:NAMed
<Filename>
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:CREate:NAMed
<Filename>
Generates a signal and saves it to a waveform file.
Setting parameters:
<Filename>
string
Example:
BB:ARB:TSIG:SINE:CRE:NAM 'sine_test'
generates a test sine signal and saves it into the wavefile
sine_test
.
Usage:
Setting only
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:I
<I>
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:Q
<TSig>
Sets the value for the Q component of the test signal
Parameters:
<TSig>
float
Range:
-1 to 1
Increment: 0.001
*RST:
0
Default unit: FS
Example:
BB:ARB:TSIG:CIQ:Q 0.5
sets the value for the Q component of the test signal.
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:AMPLitude
<Amplitude>
Sets the digital amplitude of the rectangular wave.
SOURce Subsystem
