![background image](http://html2.mh-extra.com/html/quantum/scalar-i500/scalar-i500_user-manual_3563454132.webp)
Chapter 3 Configuring Your Library
Configuring Library Security Settings
Scalar i500 User’s Guide
117
The paths to open the appropriate screens are as follows:
• From the web client, select
Setup > I/O Blades > Data Path
Conditioning
.
• From the operator panel, select
Setup > I/O Blades > Data Path
Conditioning
.
Configuring Library Security Settings
Administrative users can use the operator panel
Security Settings
screen
to change the following security features:
•
Network Interface
— enables or disables all external access to the
library. This setting is enabled by default to allow external access.
•
SSH Services
— enables or disables Secure Shell (SSH) services, such
as SSH (port 22), from accessing the library. This setting is enabled by
default.
•
ICMP
— enables or disables external attempts to discover the library
by pinging it (by means of the Internet Control Message Protocol
[ICMP] Echo packets). This setting is enabled by default.
•
Remote UI
— enables or disables remote access to the library via the
web client (port 80). This setting is enabled by default.
•
SNMP
— enables or disables SNMP traffic to the library (port 161).
This setting is enabled by default.
•
SMI-S
— enables or disables SMI-S traffic to the library (port 5988).
This setting is enabled by default.
You cannot configure the security settings from the web client. The path
to open the appropriate screen is as follows:
• From the operator panel, select
Tools > Security
.
Note:
This setting differs from enabling/disabling SMI-S in the
Tools > System Settings
menu (see
Configuring System
Settings
on page 118).