![background image](http://html2.mh-extra.com/html/quantum/scalar-i500/scalar-i500_user-manual_3563454080.webp)
Chapter 3 Configuring Your Library
Working With Partitions
Scalar i500 User’s Guide
65
or delete an existing partition to free up resources. For more information,
see
Modifying Partitions
on page 66 and
Deleting Partitions
on page 67.
When you manually create partitions, the library creates control paths.
See
Working With Control Paths
on page 78 for a description of the
default control paths and how to change them.
When creating partitions manually, you need to provide the following
information:
•
Emulation Type
— the type of library that the partition is emulating:
• ADIC Scalar i500 (default)
• Quantum Scalar i500
• Quantum Scalar i2000
• ADIC Scalar i2000
• ADIC Scalar 100
• ADIC Scalar 24
•
Partition Name
— limited to a maximum of 12 lower-case
alphanumeric characters and underscores (_)
•
Media Barcode Format
— defaults to Standard. The available options
are as follows:
•
Standard Six
— Six character barcode number with or without a
one or two-character media ID, for example, “XXXXXXL4” or
“XXXXXX”. Only the six character barcode is reported to the
host.
•
Plus Six
— Six character barcode number followed by a media ID,
for example, “XXXXXXL3”. Six character barcode and media ID
are reported to the host.
•
Extended
— Five to 16 characters total, including a barcode
number and optional media ID. All characters are reported to the
host, regardless of having a media ID or not. If a media ID is
included, the label must have a five to 14 character barcode
followed by a media ID, for example, “XXXXXXXXXXXXXXL2”.
If a media ID is not included, the label must have a five to 16
character barcode, for example, “XXXXXXXXXXXXXXXX”.
•
Media ID Last
— Five to 14 character barcode number followed by
media ID, for example, “XXXXXXXXXXXXXXLT”. The media ID
is reported to the host last.