![background image](http://html2.mh-extra.com/html/quantum/scalar-i500/scalar-i500_user-manual_3563454173.webp)
Chapter 5 Getting Information
Using Advanced Reporting
Scalar i500 User’s Guide
158
• Attributes—Specifies which values are included in the report, and
how they are combined. Select in any combination, including all
(default) and none. If you select no attributes, the chart displays the
TapeAlert count for the selected Grouping.
• Cartridge Barcode — All relevant tape cartridges.
• Drive Physical SN — All relevant tape drives.
• TapeAlert — The TapeAlert flags that were issued. For a
description of all TapeAlert flags, see
Appendix B, TapeAlert
Flag Descriptions
.
• Chart — How the data is displayed in the chart. Choose Area, Bar
(default), Line, or Pie.
• Type — The chart type. Select one of the following:
• Rollup (default) — Displays the number of TapeAlerts for the
combination of Grouping and Attributes you selected (default).
• Trend — Shows the occurrence of TapeAlerts over time.
• Grouping—Specifies which drive(s) or tape cartridge(s) on which to
base the report. Choose one of the following:
• All (default) — All tape drives and tape cartridges for which a
TapeAlert was issued during the specified range.
• Selected Drive by Physical SN — An individual tape drive. Only
tape drives which issued a TapeAlert during the specified range
appear in the report.
• Selected Cartridge by Barcode — An individual tape cartridge.
Only tape cartridges that were associated with a TapeAlert
during the specified range appear in the report.
• Sorting— Specifies how the data will be sorted. Choose from the
following:
• Alphabetical
• Count (ascending)
• Last Occurrence (default)
You can only access this report from the web client. The path to open the
report is
Reports > Advanced Reporting > Media Integrity Analysis
.