Chapter 7 Installing, Removing, and Replacing
Replacing an Expansion Module
Scalar i500 User’s Guide
275
4
If your library contains FC I/O blades, install both the I/O blades
and the accompanying fan blades in the expansion module. For
details, see
Adding, Removing, and Replacing FC I/O Blades
on
page 306 and
Adding, Removing, and Replacing the I/O Fan Blade
on page 317.
5
Add the LCB to the control module. For details, see
Removing and
Replacing the Library Control Blade and LCB Compact Flash Card
on
page 276.
6
Connect all power cords, network data cables, and module-to-
module cables. Make sure the module terminators are installed at the
top and bottom of the stack of modules. For cabling instructions, see
Cabling the Library
on page 172.
7
Power on the library.
8
Once the console appears, use the operator panel or web client to
delete and recreate all partitions.
9
Add the tape cartridges to the library’s modules using the I/E station
commands from the operator panel or web client.
10
If the host application inventories the location of each tape cartridge
in the library, open the host application and reinventory in order to
sync its logical inventory with the physical inventory of the library.
