Scalar i500 User’s Guide
47
Chapter 3
3
Configuring Your Library
Once you have installed the hardware as described in the
Getting Started
Guide
, you are ready to configure your library’s settings. A Setup Wizard
helps you get started configuring your library, and menu commands on
both the operator panel and the web client allow you to reconfigure your
library at any time.
About the Setup Wizard
When you first power on the library, the operator panel displays the
Setup Wizard, which walks you through the initial configuration of the
library’s basic operational settings.
The Setup Wizard on the operator panel only runs once, at initial startup.
After that, administrative users can always use the Setup Wizard on the
web client or use commands on the
Setup
and
Operations
menus to
modify all library settings, including network settings. See
Completing
the Library Configuration With Menu Commands
on page 48.
Caution:
Always save the library configuration after modifying
configurable items. This will allow you to restore the most
current settings if necessary. See
Saving and Restoring the
Library Configuration
on page 329.