![background image](http://html2.mh-extra.com/html/quantum/scalar-i500/scalar-i500_user-manual_3563454333.webp)
Chapter 7 Installing, Removing, and Replacing
Adding, Removing, and Replacing the I/O Fan Blade
Scalar i500 User’s Guide
318
Figure 31
on page 308 shows the FC I/O blade and I/O fan blade
installed side-by-side in the expansion module.
Adding an I/O Fan Blade
7
These instructions explain how to add an I/O fan blade to your library.
You can add an I/O fan blade while the library is powered on.
Required tools:
None
1
Access the back of the expansion module.
2
Remove the cover plate from blade bay to the right of the bay for the
FC I/O blade.
3
Press up and out to open the latch hooks on each side of the I/O fan
blade. The LED must be at the bottom of the blade.
Note:
The recommended order of installing the FC I/O blade
and fan blade in an expansion module is starting from the
bottom two bays and moving up.