![background image](http://html2.mh-extra.com/html/quantum/scalar-i500/scalar-i500_user-manual_3563454072.webp)
Chapter 3 Configuring Your Library
Managing the Network
Scalar i500 User’s Guide
57
You cannot enable the SSL settings from the web client. The path to open
the appropriate screen is as follows:
• From the operator panel, select
Tools > System Settings > Enable SSL
.
Configuring SNMP
Settings on the Library
3
SNMP is a light-weight protocol designed for remote management and
monitoring of infrastructure devices. The library provides SNMP
support, so an external management application can be configured to
receive library SNMP information. The library supports SNMP by
publishing a Management Information Base (MIB) that can be queried to
obtain the status of the library and many of its individual components.
SNMP information can be obtained from the library using SNMP Traps
and GET queries.
For more information about SNMP, see the
Basic SNMP Reference Guide(6-
01370-xx)
. For information on integrating MIBs with an SNMP
management application, contact your network management application
vendor.
Administrative users can perform the following SNMP procedures:
• Register the IP addresses and port numbers of external management
applications, enabling them to receive SNMP traps from the library.
For more information, see
Registering External Management
Applications
on page 58.
• Enable or disable support for SNMP v1 and v2c. SNMP v3 is enabled
by default and cannot be disabled. For more information, see
Enabling SNMP Versions
on page 59.
Note:
Before enabling SSL settings, make sure you enter a name for
the library in the Library Name text box when configuring
network settings (
Setup > Network Mgmt
on the operator
panel). After enabling SSL settings, use that library name to
access the library. If you do not use that name, you will receive
a security alert. In addition, make sure to complete all the text
boxes listed on the web client Contact Information screen
(
Setup > Notification > Contact Information
) before enabling SSL
settings. This information is used to identify company
information in the SSL certificate.