Chapter 3 Configuring Your Library
Working With Partitions
Scalar i500 User’s Guide
61
You cannot enable or disable SNMP authentication traps from the
operator panel. The path to open the appropriate screen is as follows:
• From the web client select
Setup > Network Management > SNMP
.
Downloading the SNMP MIB
3
The library supports an SNMP MIB that can be used to integrate the
library with commercial SNMP management applications. The MIB can
be queried to obtain the status of the library and many of its individual
components. Administrative users can download the SNMP MIB from
the library. The MIB can then be installed on an SNMP external
management application.
For more information about the library MIB, see the
Basic SNMP Reference
Guide (6-01370-xx)
or contact Quantum Technical Support. For contact
information, see
Getting More Information or Help
on page 8. For
information on integrating MIBs with an SNMP management
application, contact your network management application vendor.
You cannot download the SNMP MIB from the operator panel. The path
to open the appropriate screen is as follows:
• From the web client select
Tools > Download SNMP MIB
.
Working With Partitions
Partitions are virtual sections within a library that present the appearance
of multiple, separate libraries for purposes of file management, access by
multiple users, or dedication to one or more host applications. The library
must contain at least one unassigned tape drive and slot to create a
partition.
The
Setup Wizard: Partitioning
screens allow administrative users to select
the number of new library partitions to create.
Note:
The SNMP MIB is also available on the
Scalar i500
Documentation and Training CD
.
