![background image](http://html2.mh-extra.com/html/quantum/scalar-i500/scalar-i500_user-manual_3563454165.webp)
Chapter 5 Getting Information
Viewing Network Settings
Scalar i500 User’s Guide
150
•
Partitions
— name, online status, emulation type, barcode policy,
number of total tape drives in the partition, number of active tape
drives partition, total media, mounted media, total slots, full slots,
total I/E stations, full I/E stations, and encryption method of each
partition.
•
Modules (Chassis)
— manufacturer, model type, and serial number of
each module.
You can print the report by clicking on the printer icon in the report
window.
The path to open the report from the web client is
Reports > Library
Configuration
.
Viewing Network Settings
The
Network Settings
report provides information on the following
library network settings:
•
Network
— host name, primary DNS, alternate DNS.
•
IPv4 Settings
— Dynamic Host Configuration Protocol (DHCP)
enabled/disabled, IP address, gateway address, and net mask.
•
IPv6 Settings
(if IPv6 is enabled) — DHCP enabled/disabled,
Stateless enabled/disabled, Static enabled/disabled, network prefix,
gateway, and all IPv6 addresses.
•
SSL
— SSL, port, and cipher of the library.
•
SMI-S
— access and state enabled/disabled settings of the library.
•
SNMP
— access enabled/disabled, V1 enabled/disabled, V2
enabled/disabled, V3 enabled/disabled, algorithm, encryption
enabled/disabled, and port.
•
SNMP-Traps
— IP addresses and ports.
The path to open the report from the web client is
Reports > Network
Settings
.