Chapter 7 Installing, Removing, and Replacing
Adding Expansion Modules to an Existing Library
Scalar i500 User’s Guide
229
9
Repeat these steps for each module you need to re-install in the
library configuration.
Preparing to Use the
Library
7
Prepare to use the library as follows:
1
Add the tape drives to the modules. For details, see
Adding,
Removing, and Replacing Tape Drives
on page 303.
2
Add the power supplies. For details, see
Adding, Removing, and
Replacing Power Supplies
on page 281.
3
Add the LCB to the control module. For details, see
Removing and
Replacing the Library Control Blade and LCB Compact Flash Card
on
page 276.
1
Y-rail in unlocked, functional position
