Chapter 5 Getting Information
Viewing, Saving, and E-mailing Library Logs
Scalar i500 User’s Guide
153
test again, the new information overwrites the previous information.
This option presents the summary log. For more information, see
Using the Installation Verification Test
on page 348.
•
Installation Verification Test Detailed Log
— This log is saved each time
you run the Installation Verification Test (IVT). The log saves only the
information from the most recently run test. If you run the test again,
the new information overwrites the previous information. This
option presents the detailed log. For more information, see
Using the
Installation Verification Test
on page 348.
•
Command History Log
— Available only if you are using FC I/O
blades. When you select this report, you choose the FC I/O blade and
device for which you want to run the report. The
Blade
menu lists all
FC I/O blades installed in the library (if more than one are installed).
The
Devices
menu lists the devices associated with the selected FC
I/O blade. The report shows all commands from the selected device
to the selected blade. When the log file reaches its maximum size, the
oldest information is replaced as new information is added.
•
Cleaning Log
— Shows all cleanings that have been performed in the
library since firmware version 520G was installed. When the log
reaches its maximum size, the oldest information is replaced as new
information is added. The comma-separated values (csv) file
provides the following information:
Date Time (date and time); Barcode (barcode of the cleaning
cartridge); Tape (location coordinates of the cleaning cartridge);
Drive (location coordinates of the tape drive that was cleaned); Status
(pass/fail); Return Code (service use only), Cleaning Type (Manual,
Auto, MoveMedium), Expired (“Invalid” if the tape is expired or a
data tape was improperly used to clean; “-“ if not applicable); Usage
Count (“N/A” if the cleaning did not complete); Reserved.
•
Slot Position Log
— Shows current information for all slots in the
library. The comma-separated values (csv) file provides the following
information for each slot:
Date and Time, Slot Type (Picker, Drive, Storage, or IE), Object
Present? (Y, N),
Location Coordinates, X Position, Y Position, Angle
Position, X Calibration Offset, Y Calibration Offset.
•
RAS Tickets Log
— Records all RAS tickets for the library. When the
log file reaches its maximum size, the oldest information is replaced
as new information is added.
The path to open the report from the web client is
Reports > Log Viewer
.
