![background image](http://html2.mh-extra.com/html/quantum/scalar-i500/scalar-i500_user-manual_3563454261.webp)
Chapter 7 Installing, Removing, and Replacing
Permanently Removing Expansion Modules From an Existing Library
Scalar i500 User’s Guide
246
7
Close the library’s I/E station and access doors.
8
Connect all power cords, network data cables, and module-to-
module cables. Make sure the module terminators are installed at the
top and bottom of the stack of modules. For cabling instructions, see
Cabling the Library
on page 172.
9
Power on the library.
10
Add the tape cartridges to the library’s modules using the I/E station
commands from the operator panel or web client.
1
Parking tab in “unparked” position