0x1F0007A5
PiezoMike Exit
Window (Phys. Unit)
Exit window of the target position for motion in
closed-loop operation.
Defines a tolerance range around the entrance
window for the target position (parameter
0x1F0007A4) to maintain the on-target signal
after motion. The on-target signal is no longer
output and an attempt is made to approach the
target position again only when the current
position is so far away from the target position
that it lies outside the exit window.
0x1F0007A7
PiezoMike Single Step
Enter Factor
Entrance window for linear mode for motion in
closed-loop operation.
Commanded motion is done in step mode until
the entrance window for linear mode is reached.
Motion continues in linear mode until the
entrance window for target position (parameter
0x1F0007A4) has been reached.
Specified as entrance window factor for the
target position
0x1F0007A8
PiezoMike Single Step
Exit Factor
Exit window for linear mode for motion in
closed-loop operation.
Defines a tolerance range around the entrance
window for linear mode (parameter
0x1F0007A7) for maintaining linear mode.
Switches back to step mode to move to the
target position only when the current position is
so far away from the target position that it lies
outside the exit window.
Specified as exit window factor for the target
position (parameter 0x1F0007A5)
0x1F000000
Q-Motion Upper
Supply Voltage (V)
Maximum output voltage for piezo inertia drives.
The value depends on the type of the drive.
0x1F000700
Q-Motion Step Size
(Phys. Unit)
Size of the slow individual steps in closed-loop
operation
0x1F000000
Q-Motion Upper
Supply Voltage (V)
Maximum output voltage for piezo inertia drives.
The value depends on the type of the drive.
0x1F000701
Q-Motion Delay (ms)
Delay time when switching between two
operating modes (e.g., step mode and linear
mode).
0 to 2000 [ms]
0x1F000000
Q-Motion Upper
Supply Voltage (V)
Maximum output voltage for piezo inertia drives.
The value depends on the type of the drive.
0x1F000000
Q-Motion Upper
Supply Voltage (V)
Maximum output voltage for piezo inertia drives.
The value depends on the type of the drive.
0x1F000100
Q-Motion Lower
Supply Voltage (V)
Minimum output voltage for piezo inertia drives.
The value depends on the type of the drive.
0x1F000000
Q-Motion Upper
Supply Voltage (V)
Maximum output voltage for piezo inertia drives.
The value depends on the type of the drive.
0x1F000200
Q-Motion Forward
Current (A)
Maximum output current for piezo inertia drives
during forward motion.
The value depends on the type of the drive.
4 PRODUCT DESCRIPTION
PZ285EN
‒
1/30/2019
30
M O T I O N | P O S I T I O N I N G