0xE Numerator Of The Counts-Per-Physical-Unit Factor
Used in: Physical Units (31), Setting Up "Position Distance" Trigger Mode (77), Setting Up "POffset" Trigger
Mode (78), Setting Up "Single Position" Trigger Mode (79)
Description:
Numerator of the factor for converting impulses to physical units.
The factor for the counts per physical unit of length specifies the
unit of length for position queries and motion commands in closed-
loop operation. The values of every parameter, whose unit is either
the physical unit of length itself or a unit of measurement based on
it, are automatically adapted to the set factor. The factor for the
counts per physical unit of length has no impact on the stability of
the servo loop but is used for the input and output scaling of posi-
tion values.
Data type
INT
Command level
0
Item type
Axis
Source of data
Positioner database
Possible values
Decimal number
0xF Denominator Of The Counts-Per-Physical-Unit Factor
Used in: Physical Units (31), Setting Up "Position Distance" Trigger Mode (77), Setting Up "POffset" Trigger
Mode (78), Setting Up "Single Position" Trigger Mode (79)
Description:
Denominator of the factor for converting impulses to physical units.
The factor for the counts per physical unit of length specifies the
unit of length for position queries and motion commands in closed-
loop operation. The values of every parameter, whose unit is either
the physical unit of length itself or a unit of measurement based on
it, are automatically adapted to the set factor. The factor for the
counts per physical unit of length has no impact on the stability of
the servo loop but is used for the input and output scaling of posi-
tion values.
Data type
INT
Command level
0
Item type
Axis
Source of data
Positioner database
Possible values
Decimal number
10 PARAMETER REFERENCE
PZ285EN
‒
1/30/2019
179
M O T I O N | P O S I T I O N I N G