■
You can open and edit the positioner database directly with PIStages3Editor, which is
included on the product CD, .
The following describes how to use to PIMikroMove create and change a parameter set for a
positioner.
Requirements
✓
You have installed the latest version of the PISTAGES3.DB database onto your PC.
✓
If PI provided a custom positioner database for your positioner, the dataset was imported
into PIStages3.
✓
PIMikroMove has established communication between the E-871.1A1N and the PC.
Creating a Parameter Set for Positioners
1. Select the
E-871.1A1N > Select connected stages...
menu item in the main window of
PIMikroMove.
➔
The
Start up stages/axes for E-871.1A1N
window opens and the
Select connected stages
step is active.
2. Select an appropriate type of positioner during the
Select connected stages
step:
a) Click
Assign Type from ID Chip
.
or
a) Highlight the positioner i then
Stage database entries
list.
b) Click
Assign
.
c) Confirm the selection with
OK
.
➔
The
Save all changes permanently?
dialog is opened.
8 E-871.1A1N FUNCTIONS
PZ285EN
‒
1/30/2019
108
M O T I O N | P O S I T I O N I N G