PI E-871.1A1N, User Manual, Page: 124 / 226

<CTO -
Pam> Parameters Possible val-
ues for <Val-
ue> Description
11 PulseWidth (Integer fac-
tor) Factor that determines the
pulse width for the Hardware-
Trigger mode (TriggerMode 9).
Pulse width = 33.3 ns × Pulse-
Width
Format: CTO{␣<TrigOutID>␣<CTOPam>␣<Value>}
Arguments: <TrigOutID> Digital output of the electronics
<CTOPam> CTO parameter ID
<Value> Value that the CTO parameter is set to
CTO? Get Configuration Of Trigger Output
Used in: Digital Output Signals (76)
Description: Queries the value that is configured for the specified trigger output
line and the specified CTO parameter.
Format: CTO?[{␣<TrigOutID>␣<CTOPam>}]
Arguments: <TrigOutID> Digital output of the electronics
<CTOPam> CTO parameter ID
If no arguments are specified, the response contains the values for
all parameters and all output lines.
Response: {<TrigOutID>
␣
<CTOPam>=<Value>
␊
}
<TrigOutID> Digital output of the electronics
<CTOPam> CTO parameter ID
<Value> Value of <CTOPam> that was configured for
<TrigOutID>
DEL Delay The Command Interpreter
Used in: Running the Macros (95)
Description: Delays running the macro for a fixed period of time.
Long description DEL can only be used in macros.
Note: Do not mix up DEL (delayed) with
MAC DEL (p. 146) (deletes
macros).
Format: DEL␣<uint>
Arguments: <uint> Delay time span in milliseconds [UINT]
9 COMMAND REFERENCE PZ285EN
‒
1/30/2019
124
M O T I O N | P O S I T I O N I N G