IFS Set Interface Parameters As Default Values
Used in: E-871.1A1N Interfaces (16)
Description:
Configures the interface parameters in the nonvolatile memory.
Long description
The changed interface parameters are active after the next reboot.
The PC's interface configuration may also have to be changed.
Notice: Note that the number of write cycles in the nonvolatile
memory is limited. Therefore, save to the nonvolatile memory only
when necessary.
Use IFC to change the interface parameters in the volatile memory
(RAM).
Possible values:
<InterfacePam>
<PamValue>
Description
RSBAUD
9600, 19200, 38400,
57600 or 115200
Baud rate for the
RS-232 interface
IPADR
<UINT>.<UINT>.<UIN
T>.<UINT>:50000
IP address and port
for the TCP/IP inter-
face
Port 50000 cannot be
changed.
IPADR is only used
when IPSTART = 0.
IPSTART
0, 1
<PamValue> = 0: The
IP address defined by
IPADR is used
<PamValue> = 1:
DHCP is used (de-
fault)
IPMASK
<UINT>.<UINT>.<UIN
T>.<UINT>
TCP/IP interface sub-
net mask
Format:
IFS <Pswd>{␣<InterfacePam>␣<PamValue>}
Arguments:
<Pswd>
Password for writing to the nonvolatile memory
Default value is "100".
<InterfacePam>
Interface parameters (STRING)
<PamValue>
Parameter value
9 COMMAND REFERENCE
PZ285EN
‒
1/30/2019
142
M O T I O N | P O S I T I O N I N G