manualshive.com logo in svg

PI E-871.1A1N, User Manual, Page: 111 / 226

Share
Download
PI E-871.1A1N User Manual Download Page 111

c) Confirm the selection with 

OK

.

➔

The 

Save all changes permanently?

 dialog is opened.

3. Click 

Keep the changes temporarily

 in the 

Save all changes permanently

 dialog to load

the parameter settings into the volatile memory of the E-871.1A1N.

➔

The 

Start up stages/axes

 window changes to the 

Start up axes

 step.

4. Click 

Close

 to close the 

Start up stages/axes

 window.

5. Open the expanded single axis window for the selected positioner in the main window of

PIMikroMove by clicking the right mouse button on the corresponding line of the 

Axes

 tab

and selecting 

Show Expanded Single Axis Window

 in the context menu.

6. Enter new values for the parameters to be changed:

8  E-871.1A1N FUNCTIONS

PZ285EN 

‒

 1/30/2019

111

M O T I O N   |   P O S I T I O N I N G

Summary of Contents for E-871.1A1N



































































































































































































































Reviews:

No comments