manualshive.com logo in svg

PI E-871.1A1N, User Manual, Page: 19 / 226

Share
Download
PI E-871.1A1N User Manual Download Page 19

PC software

Operat-
ing sys-
tem

Short description

Recommended use

MATLAB drivers

Win-
dows

MATLAB is a develop-
ment environment and
programming language
for numerical calcula-
tions (must be ordered
separately from Math-
Works).
The PIMATLAB driver
consists of a MATLAB
class that can be inclu-
ded in any MATLAB
script. This class sup-
ports the PI General
Command Set.
The PI MATLAB driver
does not require and
additionalMATLAB tool
boxes.

For users who want to use
MATLAB to program their ap-
plication.

PIStages3Editor

Win-
dows

Program opening and
editing positioner data-
bases in .db format.

For users who want to deal
with the contents of position-
er databases more intensive-
ly.

PITerminal

Win-
dows,Li-
nux

Simple user interface
that can be used for
nearly all PI controllers.

For users who want to send
GCS commands directly to
the controller.

PI Firmware Updat-
er

Win-
dows

Program for updating
the firmware of the
E-871.1A1N.

For users who want to update
the firmware.

PIUpdateFinder

Win-
dows

Checks the PI software
installed on the PC. If
newer versions of the
PC software are availa-
ble on the PI server,
they are offered for
download.

For users who want to update
the PC software.

USB driver

Win-
dows

Driver for the USB inter-
face

For users who want to con-
nect the controller to the PC
via the USB interface.

4.7

Positioner Database

You can select a parameter set appropriate for your positioner from a positioner database in
the PC software from PI. The software transfers the values of the selected parameter set to
the volatile or nonvolatile memory of the controller.

4  PRODUCT DESCRIPTION

PZ285EN 

‒

 1/30/2019

19

M O T I O N   |   P O S I T I O N I N G

Summary of Contents for E-871.1A1N



































































































































































































































Reviews:

No comments