FASTCAM-APX RS Hardware Manual
-93-
3.12. Input of External Sync Signals
The APX RS has an operation mode for recording in sync with an external sync signal.
By using sync signals fed from outside, synchronized multiple-camera recording or
single- or multiple-camera recording in sync with external instrumentation and lighting
equipment is possible.
This section describes how to set up the APX RS system in external sync environment
giving some tips and precautions.
3.12.1. Input of External Sync Signals
The table below shows external signals that can be input to the APX RS system. Follow
the below procedure to set up the system.
1. Connect an external sync signal to the processor.
2. The green LED (POWER LED) on the rear panel blinks.
3. Press the MENU key to display the menu list.
4. Use the U-D keys on the keypad to select the [EXT-SYNC IN] menu.
5. The menu is shown. Details of the menu is as follows:
